Sept 14, 0: The few guys ive ever talked to that shot steel in those competitions rarely if ever just grabbed a stock ruger at random and some random factory loads and just rolled out and shot their best as the groups would show from the old days. The tests you speak of were just that, stock revolver and some random loads. Im sure taffin and gunblast could spend some time and find best loads and tighten those groups up. Max prasac has quite a few ruger tests and i dont recall one where the gun wasnt under 3 moa and most had at least one load under 2 moa that he has tested. No offense, but the loads they’re testing aren’t picked out of a hat, most are fairly traditional loadings. How many would it have been appropriate for them to test?
This 45 inch sword features unstopped single fullers about 3 inches long on the 38 inch blade. The fullers retain remnants of writing and maker’s marks. The cup hilt is chiseled iron with shell and New Item Email Price:
Designed in , the Single-Six was Ruger’s first revolver, following the initial success in of Bill Ruger’s Mark I semi-autoLR pistol. In the decade of the ’50s, Westerns were all the rage both in the theater and on the new fangled television.
Ah, but should you? The release latch is moderately flared on its top and left side, providing the shooter with an extra bit of purchase while unlatching the cylinder. The release is truncated on the right side and chopped on the right to accommodate the laser. In short, the design looks like an afterthought. The balances well in the hand.
The sights were atrocious. Believe you me, nobody wants an unsightly trouser tear in the heat of a gunfight. It makes the after-action pictures look ridiculous. Once the laser is properly set, shooters can expect the size of their groups to shrink by 25 percent. After running through a few boxes of standard. To be evenhanded if only , there there was no trigger grit or creep.
STURM RUGER & CO INC
Revolver — A revolver is a repeating handgun that has a revolving cylinder containing multiple chambers and at least one barrel for firing. Revolvers might be regarded as a subset of pistols, or as a subset of handguns. Though the term revolver usually only refers to handguns, other firearms may also have a revolving chamber and these include some models of grenade launchers, shotguns, and rifles.
Find great deals on eBay for ruger single six old model. Shop with confidence.
Wayne killed this old eland bull at yards with a. It was a pre-war rifle with blonde, figure-less wood. Soon after climbing into elk country with it that November morning, I heard the clack of antlers. I crept through the pines, downwind on quiet grass. A cow saw me, however. Behind her trailed a spike, the only bull I could see. He stopped in an opening. The gold bead settled low in his ribs and at the explosion, the bullet landed there.
Ruger Old Model Single Six
Certainly tamer and softer then stout Magnum loads. Those little jacked up “Elephant” killers as I call them, really bark and snap the wrist. I’ll take my 44 Magnum anyday as I find it more pleasant assuming unported pistols without heavy underlugs. Now, to the specific topic at hand. Do you really want or need to shoot 9mm out of your wheelgun?
Ruger does not necessarily produce firearms in serial number order. There are occasions when blocks of serial numbers have been manufactured out of sequence, sometimes years later. Also, within a model family the same serial number prefix may be used to produce a variety of different models, all in the same block of serial numbers.
It has medium-gray plastic grips that are supposed to simulate stag. It was one of the early Crosman lookalike airguns of which they produced a bundle. Crosman Single-Action Six was a realistic. The whole cylinder revolved when the hammer was cocked. The best and worst of the gun The best thing about this gun is that the cylinder actually revolves — not just a thin slice of it, like most CO2 revolvers. The chambers were loaded from the front instead of the rear and the pellets were put in tail first.
A coiled spring around the cylinder held all six pellets in place until they were fired. Another nice feature was the weight, which is pretty substantial. Because the gun is all metal, it feels very balanced in your hand.
The barrel and loading tube still have most of the original bluing on it. The wood stocks are in good condition and have hand checkering on them. This hand checkering was not done in the factory but probably by the original owner of the carbine. The forearm has a crack in the front that you can see in the pics and is missing the band screw. The band screw is needed to keep the forearm in place The caliber of this firearm is marked 30 W.
The bore is great!
Jul 31, · A Brief rundown of my 2 Ruger single Sixes. One is a late 50s production old model with the original 3 screw action. The second is a s New model single six .
They also fit the New England Firearms. Both are complete with mounting bolts, just missing the sling swivels on the lighter wood set. This is a must have reference book for Winchester Collectors. Hardbound with DJ in fine condition. The most lavish work ever produced on American long arms, this book has been published with the full cooperation of the Winchester Division of the Olin Corporation, as well as Winchester licensee, the U.
The book’s large format presents many of the firearms in exquisite close-ups, accompanied by substantial details of history, development, and significance.
Ruger Single Six Standard Serial Number History
North Texas I have a number of Rugers and have always considered them a great value, but the last few years they seem to be having some troubles. It seems that many of their newer releases are being recalled. The latest is a recall on the Ruger Precision Rifle. I sent my new Ruger MKIV in for the recall and when it came back the hammer was not cocked and had to be manipulated before it could be installed onto the frame.
The RUGER ® NEW MODEL SINGLE-SIX ® HUNTER revolvers feature a target crowned barrel with an integral barrel rib cut for both Ruger’s patented scope rings .
Classic Single Action offers new firearms, custom grips and gunsmith work for single action revolvers of all makes and models. If you want perfection, appreciate fine craftsmanship and expect the highest quality, you will find it here. Joe is well known for his one-of-a-kind silverwork designs. As a classically trained silversmith, all of the silverwork is created by him, in his studio. Each piece is made at the time the grips are made, not before. If you are looking for quality gunsmith work, you will be well taken care of here.
Joe’s Premium Action Work is second to none. A twenty-two point service. All timing issues are fixed. Internal friction surfaces are honed and polished.
Ruger Gun Manuals
Another possibility and one I’m starting to think is most likely is that your example is from I know you said the box is marked RSS5 but perhaps that’s an error. You have wood grip panels so it could also be an RSS5W. Either way it would be a pretty scarce example and this is one time it would be a good idea to contact Ruger customer service and request a letter that would nail down exactly what model you have and what year it was shipped. It may have been shipped originally as an RSS5W non-convertible and the magnum cylinder was fitted later.
This was fairly common back in that era and something the factory was willing to do then for a modest fee thereby giving the Single Six owner the convertible option.
Shop for Old Model Single Six Schematics with Numrich Gun Parts.
I had been a loyal 94 follower and had tried most of the calibers and variations. Something struck me wrong about the closing of the plant and I was soon out of the Winchester ownership program. One day I heard about the new. Upon firing both, I found the chambers to be to rough and actually had fired rounds brass seize up in the chambers. Both had to have the chamber polished out! I did a little research and found others who had the same problem. I then began to notice some quality issues with the newer LA Marlins on my main dealers rack and thought to myself – it is happening again.
I have actually gotten a little ahead of myself.